Home

Filter Separators

Gas Separators with Directional Blade™

Gas Scrubbers with Vane Internal

Steam & Air Separators

Coalescing Gas Filters & Dust Filters

Liquid Filters

Sample Coolers

Liquid-Liquid Separators

Cone Strainers

Basket Strainers

Simplex Strainers

Duplex Strainers

Wye Strainers

Tee Strainers

Horizontal Strainers

Line Blinds & Bleed Rings

Special Features

Application & Questionnaire

Technical Information

Contact Us

Liquid-Liquid Separators


Liquid-Liquid Separators
Liquid-Liquid Separators/Coalescers

Winston Liquid-Liquid coalescers can separate any two immiscible liquids. Mixtures such as carried-over caustic in a refinery fuel treating process, water from jet fuel, lube oil from ammonia, hydrocarbon condensate from water, carried-over amine from an amine contactor, oil from water or water from oil can be separated to less than 10 parts per million (of the effluent carry-over).

Separation is achieved through the use of knitted wire mesh, coalescing cartridges, separator cartridges, or a combination.
Metal Mesh Flow Chart
Type 62H-MM Dimensions
 
TYPE 62H-MM(SS)
TYPE 62H-MM(SS)

Horizontal single stage with metal mesh to remove small amounts of hydrocarbon from water.

 
TYPE 62H-MM(SS)

Horizontal single stage with metal mesh to removes small amounts of an aqueous solution from a hydrocarbon liquid.
TYPE 62H-MM(SS)2
Nomenclature
  • H Horizontal
  • CC Coalescing cartridge
  • V Vertical
  • SS Single stage
  • MM Metal mesh
  • 2S 2 stage
Optional: ASME Code Stamp Supports: Saddles, legs, or mounting legs.
 
TYPE 62H-CC(SS)

Horizontal separator with cartridges for removing water from hydrocarbon. 
TYPE 62H-CC(SS)
 
TYPE 62H-CC(2S)
TYPE 62H-CC(2S)

Horizontal 2 stage with coalescing cartridge to remove small amounts of water from hydrocarbon. For removing hydrocarbon from water on single or 2 stage, boot will be on top.
 
TYPE 62V-CC(SS)

Vertical single stage separator for removing hydrocarbon from water.
TYPE 62V-CC(SS)2
 
TYPE 62V-CC(2S)
TYPE 62V-CC(2S)

Vertical two-stage coalescer/separator with flow passing through one or more coalescing cartridges, then through one or more separator cartridges. Aqueous particles will be coalesced in the first stage, any aqueous particles which do not fall to the bottom are then repelled by the hydrophobic separator cartridges.
 
For heavy particulate loading, a strainer placed upstream of the separator is recommended.

Selection

 Type  Media  Effluent  Micron Size
 62H-MM (SS  Metal Mesh  25 PPM  40
 62H-MM (2S)  Metal Mesh  15 PPM  40
 62V-CC (2S)  Cartridges  5 PPM  *1 to 25
 62V-CC (SS)  Cartridges  10 PPM  **
 62H-CC (2S)  Cartridges  5 PPM  *1 to 25

Effluent: Dispersal phase carry-over
* Different cartridges are offered for different retentions. Advise retention required.
** For good solids retention, a pre-filter or strainer is recommended.